DE350SR-07 1WAY SUBWOOFER CROSSOVER (1 PCS)
Out of stock
Subwoofer crossover is a dedicated box divider, the role of the amplifier is to split the total frequency of the signal, blocking the signal above the low frequency is not allowed to pass, so bass, bass, and subwoofer, equipped with points After the frequency converter will feel more bass, and the vocal is smaller, the treble is completely gone, and the other speakers will be better than the whisper, which is normal, after all, bass sound is not so tenor sound. Subwoofer crossover is installed in the subwoofer box inside the outside can not see, a lot of finished cannon speaker manufacturers to save the fact that the cost of the gun is relatively high, or use a very low-frequency divider, or direct Connection through. If not equipped with frequency divider, the sound with a tenor, and will not be to remove the high pitched pure drums sound; With the frequency divider, the woofer will not be in the piston state of high-frequency interference, the intensity is naturally larger than not installed divider. The material is sufficient, 57 # inductors, capacitance is diameter 16MM, height 35MM audio special high current anode capacitance, the range can be instantly reach the target, although the nominal 25V voltage, even if 100V is no problem. Bare naked clip on the terminal (press the black and white keys to insert the line has received the input, very high and easy to use), can also be welded on the copper, the design is reasonable.
Product parameters:Size: Length 11 cm, width 10 cm, height 4 cm.Install diagonal hole 12.7cm Adjacent angle: 8.5cmPower: 300W (available 300W below, for 10 inch to 12 inch subwoofer).Impedance: 4-8 ohms.Circuit: bass all the way to the standard 12db / oct.Weight 400gPull the switch: bass adjustable frequency range of about: 2HzPackage included: 1pcs 300W Subwoofer Speaker Crossover Board